Emergency Safety Shower with Eyewash SYSBEL WG7053FG Size:120*40*26.5 cm Application: Provide full-body relief from contamination Fastly and effectively Materials: AES plastic + 304 Stainless Steel
| Availability | INSTOCK |
| SKU | SYSBEL WG7053FG |
Protect lives with Emergency Safety Shower With Eyewash Stations, ANSI standard, for all types of industrial, laboratory, oil & gas and chemical applications across Riyadh, Jeddah, Dammam, Jubail, Yanbu, Jizan & all cities of Saudi Arabia.
- Plumbed or portable solutions
- Stainless steel corrosion-resistant design
- Foot pedal & push plate activation
- ANSI Z358.1 / OSHA compliant safety equipment
Emergency Shower & Eyewash Safety Unit An emergency Shower & Eyewash Safety Unit provides for immediate body and eye flushing in the event of a hazardous occurrence, and so plays a vital part in any general safety arrangement to ensure adherence to present safety legislation in industrial premises.
Product Features:
11. Comply with ANSI Z358.1-2014 and AS 4775-2007.
An Emergency Safety Shower with Eyewash is used for fast body drenching and eye irrigation in the event of an emergency exposure situation such as chemical splashes, corrosive contact or particulate contamination. The immediate high flow rate of water required to effectively flush out chemicals on the skin reduces the severity of potential skin injuries and helps ensure compliance with OSHA safety regulations.
✔ Body shower: Overhead shower head with 20+ L/min flow rate
✔ Eye wash: Dual nozzles with dust covers for hygienic flushing
✔ Activation: Foot pedal / push plate for hands-free emergency use
✔ Standards: ANSI Z358.1 and other global safety certifications
1. Valve mechanism activates in one second or less; It stays open until manually closed. (Section 4.2,5.2,6.1.4,6,2)
2. Be connected to a system capable supplying adequate flushing fluid when all components are operated simultaneously, (Section 4.5.5,7.4.4)
3. Height of the flushing fluid column patten shall be between 82"(208.3cm) and 96"(243.8cm) above floor. (Section 4.1.3,4.5.4)
4. Water supply shall be sufficient to supply at least 20GPM (75.7LPM) for 15 minutes. (section 4.1.2,4.5.5)
5. Valve actuator shall be located not more than 175.3cm (69") above floor. (section 4.2)
6. The diameter shall be minimum of 50.8cm (20") at 152.4cm (60") above floor. (section 4.1.4)
7. Center of the flushing fluid pattern shall be at least 16"(40.6cm) from any obstruction. (Section4.1.4,4.5.4)
8. Water flow pattern shall be positioned between 33"(83.8cm) and 53"(134.6cm) from the level on which user stands and 6"(15.3cm) minimum from the wall or nearest obstruction. (Section 5.4.4,6.4.4)
9. Deliverd at least 3.0 gallons(11.4liters) of water per minute for 15-minute (Section 6.1.6,6.4.5)
10. Constructed of materials that will not corrode in the presence of the flushing fluid (Section 7.1.1,7.1.2,7.1.3)
11. Located 10 seconds or 55 feet from contaminants or hazardous materials, Locate on the same level as hazard and free of obstructions. (Section 7.4.2, B5)
12. Protect nozzle head from airborne contamination, dust covers shall be removed by water flow immediately (Section 5.1.3,6.1.3)
13. Provided flushing fluid to both eye and face simultaneously at a velocity low enough without injury to skin (Section 5.1.1.6.1.1)
| product | Combination Safety Shower |
| main material | 304 stainless steels |
| flow rate (L/min)-eye/face wash | 11.4 |
| flow rate (L/min)-shower | 75.7 |
| water bowl (D*H/cm: 32*9.5)-AES plastic | NO |
| water bowl (D*H/cm: 32*9.5)-304 SS | YES |
| shower (D*H/cm: 25.5*7.5)-AES plastic | NO |
| water bowl (D*H/cm: 25.5*7.5)-304 SS | YES |
| valve 1/2" | YES |
| valve 1" | YES |
| inlet | 1" |
| outlet | 1" |
| pressure KPa | 210 |
| packing size (L*W*H cm) | 120*40*26.5 |
| G.W. (kgs.) | 124 |
| certification | ANSI Z358.1 AS 4775 CSA CE |
| model | WG7053FG |
- Rapid Response in Emergencies Water discharge is possible for over 15 minutes as needed in emergency cases.
- High-performance Wi-Fi and Cellular Routers Built for Industrial Environments Our wireless routers are designed for use in industrial settings such as chemical plants, labs, oil & gas and warehouses.
- Durable Design: Stainless steel and ABS components for longevity.
- Easy Installation & Maintenance: Wall or floor mount options with local support.
- GCC Climate Ready: Reliable performance in high-temperature regions.
1. What is the water flow requirement for emergency showers & eyewash?
Standards provided by the ANSI state that a minimum rate for a shower shall be 75 L/min and for an eyewash shall be 11.4 L/min.
2. Is it mandatory in Saudi Arabia workplaces?
Yes — any organization dealing with chemicals or hazardous oils will need to comply with regulations in relation to emergency showers and eye wash stations.
3. How long should I flush with the emergency shower/eyewash?
ANSI guidelines recommend at least 15 minutes of continuous flushing in emergency decontamination.
